Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (JJ) into the large holes in the ENDS (A and B).
Repeat this step for the HUTCH ENDS (C and D), UPRIGHT (I),
å
HUTCH UPRIGHT (J), MODESTY PANEL (L), BOTTOM (M),
and SMALL SHELF (N).
JJ
(22 used)
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
101736
www.sauder.com/services
Publicidad
