Publicidad
Step 15
Fasten the DRAWER FRONT (R) to one of the DRAWER BOX FRONTS (D338). Use two BLACK 7/8"
å
LARGE HEAD SCREWS (EEE) through the outer holes in the DRAWER BOX FRONT and into the
DRAWER FRONT. Do not overtighten the SCREWS.
Fasten the DRAWER SLIDES (DD and EE) to the DRAWER SIDES (D362). Use two BLACK 1/2" FLAT
å
HEAD SCREWS (GGG) in the exact holes shown.
NOTE: The DRAWER SLIDES are marked "Drawer Right" and "Drawer Left" for easy identifi cation.
å
First, insert a PULL MOUNT (VV) into one of the holes in the DRAWER FRONT. Insert one end of the
å
DRAWER PULL (UU) into the hole in this PULL MOUNT. Insert the other end of the DRAWER PULL
into the other PULL MOUNT and insert it into the other hole in the DRAWER FRONT.
Now, fasten the PULL MOUNTS with DRAWER PULL to the DRAWER FRONT. Use a SILVER 1-1/4"
å
MACHINE SCREW (ZZ) through the DRAWER BOX FRONT, through the DRAWER FRONT, and into
each PULL MOUNT.
The top edge of the DRAWER
FRONT should overhang the
top edge of the drawer more.
R
VV
SILVER 1-1/4" MACHINE SCREW
(2 used for the PULL and PULL MOUNTS)
Page 20
EE
D338
UU
VV
ZZ
Roller end
BLACK 7/8" LARGE HEAD SCREW
101736
EEE
(2 used for the DRAWER FRONT)
Roller end
DD
BLACK 1/2" FLAT HEAD SCREW
(4 used for the SLIDES)
www.sauder.com/services
GGG
Publicidad
