Intended Use; Safety Advice - BGS technic 8708 Manual Del Usuario

TOOLS
1 High-strength spindle
2 Pressure plate with holes and bearing
3 Pressure bolts (4 pcs.)
4 Dismantling shells
5 Mounting shells
6 Thrust piece for installing
7 Thrust piece for removing
8 Spindle nut
9 Fastening bolts for shells (2 pcs.)
10 Bearing pressure ring

INTENDED USE

This tool set is designed for disassembly and assembly of wheel hub bearing units.
The tools are suitable for Ford Focus 2 ab 2004, C-Max ab 2003, Volvo C30 ab 2006, C70 Cabriolet
ab 2006, S40 ab 2004, V50 ab 2004, Mazda 3 (BK) 1.4 / 1.6 /1,6 Turbo ab 2003.

SAFETY ADVICE

•
Read carefully the instructions before working with this tool set.
•
Do not use this tool set for other purpose for which it is designed.
•
Lifting of vehicles only allowed on the special lifting points.
•
Before starting work under a car always ensure that it is adequately supported by axle stands or
ramps. Chock wheels and ensure that the hand brake is firmly applied.
•
Always use approved eye protection, especially when working under vehicles.
•
Ensure a secure and well-gripped stance during fitting.
•
Ensure that tools are correctly mounted.
•
Regularly check the condition of the tool and replace the damaged parts.
•
Do not over tighten or use undue force as this can cause damage to both tool and component.
•
The tool is not suitable for air impact wrenches. The use of an air impact wrench may lead to the
spindle bearing or other components bursting and fragments of components flying around may
lead to injuries.
•
Always use workshop manual for detailed instructions.
•
Always lubricate the screw threads before using the tool.
•
Check & replace any damaged components as required.
•
Keep children and unauthorized persons out of the working area.
•
Keep this tool out of children reach.
•
When mounting the wheel hub/bearing unit you must hear a click. The click indicates that the
holding claws of the hub-bearing unit jumped into holding slot of the wheel bearing housing. If
the wheel hub/bearing unit is not fitted properly, the danger exists that the bearing has no firm
hold in the wheel bearing housing. This can lead to accident, serious injury and property
damage:
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Wheel Hub Bearing Unit Tool Set
for Ford, Volvo, Mazda, 78 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8708
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed