Meter Use and Precautions
•
Wait for the Blood Drop / Strip Symbol to appear before applying the sample.
•
The meter is preset blood glucose concentration in mg/dl when sold in the
United States. If your meter is not set to mg/dl when you first begin using it,
please contact Customer Support at 1-800-838-9502.
•
Meter will shut off by itself after 2 minutes of inactivity.
•
Do not get water or other liquids inside the meter.
•
Keep the strip port area clean.
•
Keep your meter dry. Avoid exposing it to extremes temperature or humidity.
Do not leave it in your car.
•
Do not drop the meter or get it wet. If you do, check the meter by running a
quality control test. Refer to Quality Control Test on page 35 for instructions.
•
Do not take the meter apart. This will void the warranty.
•
Refer to the Caring for Your Meter section on page 40 for details on cleaning
the meter.
•
Keep the meter and all associated parts out of the reach of children.
Note: Follow your doctor's recommendations when disposing of the meter and
used batteries.
All Glucose Systems Preventive Warnings with Regard to EMC:
1. This instrument is tested for immunity to electrostatic discharge as specified in
IEC 61000-4-2.
2. This instrument complies with the emission and immunity requirements
described in EN61326-1 and EN61326-2-6.
7