Acon On Call Express Manual Del Usuario página 20

9. Hypo Indicator: The meter comes with the Hypo indicator feature disabled.
Press the left (◄) button to turn the Hypo indicator "On" or "Off". Press the right
(►) button to confirm your selection. When the Hypo indicator is "Off," pressing
the right (►) button will go to the Test Reminder set up. When the Hypo
indicator is "On", pressing the right (►) button will go to the Hypo indicator level
set up. At the Hypo level set up, press the left (◄) button to adjust the Hypo
level. Then press the right (►) button to go to the Test Reminder set up.
Note: The meter allows the hypoglycemia level to be as high as 100 mg/dl. The
hypoglycemia level should be below the hyperglycemia level. Consult your
doctor before determining what your hypo blood glucose level is.
10. Test Reminder: Test reminders are a useful way to remind you when to test.
You can set 1 to 5 reminders per day. Your meter is preset with the test
reminder disabled. You must turn it on to use this feature.
• Press the left (◄) button to turn the first Test Reminder "On" and "Off".
Press the right (►) button to confirm your selection. When the Test
Reminder is "Off", pressing the right (►) button will go to the set up of the
second Test Reminder. When the Test Reminder is "On", pressing the right
(►) button will go to the set up of the time for the first Test Reminder. Press
the left (◄) button to adjust the first Test Reminder time. Press the right (►)
button to confirm the first Test Reminder time and then go to the second
Test Reminder set up.
• When the Test Reminder is "Off" during the second Test Reminder set up,
pressing the right (►) button will go to the set up of the third Test Reminder.
When the Test Reminder is "On", pressing the right (►) button will go to the
set up of the time for the second Test Reminder. Press the left (◄) button to
adjust the second Test Reminder time. Press the right (►) button to confirm
the second Test Reminder time and then go to the third Test Reminder set up.
• Repeat the same set up procedure for Test Reminder 3, 4 and 5.
• After finishing the fifth Test Reminder set up, it will then end the setup mode
and power off the meter.
17