Clearing The Memory; Transferring Records - Acon On Call Express Manual Del Usuario

Clearing the Memory

Take extreme caution when clearing the memory. This is not a reversible operation.
To clear the memory:
1. With the meter off, press and hold the left (◄) button for two seconds. This will
turn on the meter and enter the delete mode.
2. To clear the memory, press and hold both the left (◄) and right (►) buttons for
two seconds.
3. The display will show "MEM" and "- - -". After a second, the meter will clear its
memory and turn itself off.
4. If you entered the delete mode but want to exit without deleting the recorded
data, press the right (►) button. This will turn the meter off without deleting any
data.

Transferring Records

The meter can transfer stored information to a Windows-based personal computer
(PC) using an optional data transfer cable and software package. To make use of
this feature, you need the On Call
data transfer cable from ACON.
1. Install the software to your personal computer (PC) according to the
instructions from the On Call
2. Connect the USB cable to your PC and plug the audio jack of the cable into the
meter data port. Meter automatically enters "PC" mode.
®
Diabetes Management Software and a USB
®
Diabetes Management Software Kit.
33