Acon On Call Express Manual Del Usuario página 37

Notes:
• When a test strip is already inserted into the meter and meter is in the
waiting for sample application mode, at this point if data transfer cable is
plugged into meter data port then meter gives an E-12 error message and
does not automatically turn to "PC" mode.
• When meter is in "PC" mode, meter does not turn to waiting for sample
application mode after strip is inserted into meter.
3. Run the On Call
from the software for how to transfer records.
4. During the data transfer, the meter will display "to" and "PC". This means the
data is being transferred from the meter to the PC.
5. Once the data transfer is complete, the meter will display "End" and "PC".
6. After data transfer from meter to PC is completed, press the right (►) button to
turn off the meter. If nothing else happens to meter 2 minutes after data
transfer from meter to PC is completed, the meter will automatically turn off. In
this case, if you want to enter "PC" mode again, press the left (◄) and right (►)
buttons together.
See the User's Guide included with your On Call
Kit for detailed instructions.
®
Diabetes Management Software, and refer to the instructions
®
Diabetes Management Software
34