Hi" And "Lo" Messages; Hypo" And "Hyper" Messages - Acon On Call Express Manual Del Usuario

"HI" and "LO" Messages

The meter can accurately measure blood glucose concentrations between 20 to
600 mg/dl. "HI" and "LO" messages indicate results outside of this range.
If "HI" appears on the display, the measured concentration value is above
600 mg/dl. The test should be retaken to ensure that no mistake was made in the
procedure. If you are certain the meter is functioning properly and no mistakes
were made in the procedure, and your blood glucose is still consistently measured
as "HI", it indicates severe hyperglycemia (high blood glucose). You should contact
your doctor immediately.
If "LO" appears on the display, the measured concentration value is below
20 mg/dl. The test should be retaken to ensure that no mistake was made in the
procedure. If you are certain the meter is functioning properly and no mistakes
were made in the procedure, and your blood glucose is still consistently measured
as "LO", it may indicate severe hypoglycemia (low blood glucose). You should treat
yourself for hypoglycemia immediately as recommended by your doctor.

"Hypo" and "Hyper" Messages

If "Hypo" appears on the display, the measured concentration value is below the
"Hypo" (low blood sugar) target level that you have set.
If "Hyper" appears on the display, the measured concentration value is above the
"Hyper" (high blood sugar) target level that you have set.
28