Acon On Call Express Manual Del Usuario página 21

If one or more test reminders have been set, the reminder symbol will always
appear on the LCD screen when the meter is turned on. The display sample is
shown below.
The meter beeps 5 times when it is first set. It will beep again two minutes later,
and two minutes after that unless you insert a test strip or press any button.
This function will still work with Audio feature turned off.
When the meter beeps at the time set by the Test Reminder feature, the date,
time and strip symbol will be displayed. The Test Reminder symbol will also
flash. The display sample is shown below.
Note: For any step of the set up, if the left (◄) button is pressed and held, it will
allow a faster adjustment.
18