Meter Setup Before Testing - Acon On Call Express Manual Del Usuario

Before using your meter for the first time, you will need to adjust the settings that
are listed in detail below.
1. Meter Setup Mode: When meter is off, in memory mode or in average mode,
press and hold the right (►) button for two seconds to enter meter setup mode.
The meter will automatically enter the setup mode when turned on for the first
time by any method.
2. Clock: Set the clock to 12 or 24 hour mode. Press the left (◄) button to switch
between the two settings. Then press the right (►) button to save your choice.
Now you can start to set the year, month and date.
Note: The clock needs to be reset after replacing the battery.
3. Date: The year will appear at the top of the display. Press the left (◄) button to
increase the year. Once you have selected the correct year, press the right (►)
button to save your choice and start setting the month. Press the left (◄)
button to increase the month. Then press the right (►) button to save your
choice and start setting the date. Press the left (◄) button to increase the date.
Then press the right (►) button to save your choice and start setting the time.
4. Time: The hour will appear at the top of the display. Adjust the hour with the
left (◄) button until the correct hour is displayed. Press the right (►) button to
save your choice and set the minutes. Press the left (◄) button to change to
the correct minute. Press the right (►) button to save your choice and move to
set the meal marker feature.

Meter Setup before Testing

Year Month
OR
14
Date