Chauvin Arnoux DTR 8510 Manual De Instrucciones página 58

2. Press the TEST button to move to second screen, which will display Current and Deviation %.
3. Press the TEST button to move to the third screen to display the Date and Time.
4. Press the TEST button to move to the fourth screen to display the Primary and Secondary voltages of the Present Nameplate
at the time the measurement was made.
5. Press the TEST button again to return to the first screen.
6. Select any OBJECT and any TEST using the  or  key and the ENTER key to view the Measurement Record at any loca-
tion.
NOTE:
„ The DTR 8510 can store 99 OBJECTs. Each OBJECT can store up to 99 TESTs.
®
„ In Manual mode, the user can select the location to store the Measurement Record. The Measurement Records do not have
to necessarily be sequentially stored. So, during a Recall Data operation, it is important for the user to know where the data is
Figure 4-21
Figure 4-22
Figure 4-23
Figure 4-24
58