Control Features - Chauvin Arnoux DTR 8510 Manual De Instrucciones

2.2. CONTROL FEATURES

1
2
3
4
50V CAT IV
1. Display: Displays data, status and control features of the instrument.
2. USB Connector: Allows connection to a computer for instrument configuration set-up and status check, downloading of
the stored data using the DataView
3. High-side "H" Cable Connector (primary): Connection for the primary side of the transformer.
4. Low-side "x" Cable Connector (secondary): Connection for the secondary side of the transformer.
Battery Charge Input Connector: Allows the smart charger to charge the batteries.
5.
Power Switch: Turns the instrument ON or OFF (if the charger is not connected). If the charger is connected, the batteries
6.
charge in OFF/CHARGE position.
Operation and Battery Low Indicator: Green LED indicates that the instrument is on and blinks when the batteries are
7.
getting low (<12 V). The instrument will completely shut down when the batteries are below 8.7 V.
8. Display Contrast Adjustment: Allows adjustment of the display contrast.
9. Function Keys: Allows navigation of the menu and functions of the instrument.
10. Backlight ( ) Control Button: Turns the display backlight ON or OFF.
11. Test Button: Runs the selected test when pressed and released.
USE ONLY ON DE-ENERGIZED TRANSFORMERS
H
X
software and running a test.
®
MEM
ENTER
TEST
DTR
Digital Transformer Ratiometer
46
USE SPECIFIED
CHARGER ONLY
5
6
OFF/
CHARGE
7
ON
8
CONTRAST
9
10
11
8510
®