Downloading A Test - Chauvin Arnoux DTR 8510 Manual De Instrucciones

NOTE:
„ If the DTR 8510 is in Autosave mode, the connection to the computer will disable the automatic saving of the Measurement
®
Record.
„ If the Test needs to be cancelled while testing is in progress, press the TEST button on the instrument or CANCEL button on
the screen.
„ If new Test Type, Test Mode, test Filter and/or Present Nameplate values are selected, the Configuration will be changed to
reflect them in this and the following tests.
4. Press Save to save the Measurement Record in the selected Object and Test locations, then press Close to close the dialog
box.
NOTE: Pressing Save in the dialog box only saves the test to the instrument, NOT the computer. To save the test on the
computer, select Save from the File menu.

7.6. DOWNLOADING A TEST

This selection permits downloading of the stored Measurement Records from the instrument.
To download a test:
1. Click on the Download icon
will appear:
This dialog box displays the content of the memory. No Measurement Records are downloaded as yet.
2. Select the Measurement Records individually or press Select All. Press Download to get the data to the computer.
in the toolbar, or click on Recorded Data on the side menu. The Select Tests dialog box
Figure 7-11
Figure 7-12
73