Publicidad
Step 12
Fasten the SKIRTS (D) to the BOTTOM (C). Tighten six
å
TWIST-LOCK® FASTENERS.
Page 16
Curved edge
D
C
How to use the TWIST-LOCK® FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
D
Curved edge
Publicidad
