Ambient Conditions; Troubleshooting; 10.1 Tool - Cleco CellClutch CLBAW083 Serie Manual Del Usuario

Tool WLAN
Order no.
CLBP04Q
CLBPW04Q-(...)
CLBP08Q
CLBPW08Q-(...)
CLBP12Q
CLBPW12Q-(...)
Values without battery
9

Ambient conditions

Features
Operation site
Working temperature
Storage temperature
Type of cooling
Relative humidity
Working height
Degree of protection as per DIN EN60529 (IEC60 529)
10

Troubleshooting

10.1 Tool

Problem
Tool does not start
Tool not recognized.
Tool starts in tightening direc-
tion, but not in counterclock-
wise rotation.
Tool does not start with coun-
terclockwise rotation activated.
Apex Tool Group
Torque Speed
Nm r/min
(ft-lb)
Min. Max. Min.
1.1 4.0 177
(0.8) (2.9)
2.1 8.0 99
(1.5) (5.9)
3.2 12.0 70
(2.4) (8.8)
Data
Indoors
0 °C – 40 °C
-25 °C – 65 °C
Convection (self-cooling)
10 % – 90 %, no condensation
Up to 3000 m (9,843 ft) above sea level
IP40
Possible causes
No speed (RPM) programmed. ► Program speed for all active stages.
Tool temperature is too high.
Battery voltage is too low.
Software is incorrect.
Connection to laptop/PC is not
available.
Tool is defective.
No speed programmed for
counterclockwise rotation.
With counterclockwise rotation,
parameter for Speed is 0 rpm.
P2547BA | 2021-08
Weight A
kg mm
Max. (lb) (in)
1770 1.05 213.5
(2.3) (8.41)
985 1.05 213.5
(2.3) (8.41)
700 1.05 213.5
(2.3) (8.41)
Measure
► Cool down the tool.
► Change battery.
► Check CellClutch laptop/PC software.
► Check USB cable.
► Check PC driver.
► Change tool.
► Program the counterclockwise rotation: In the
CellClutch PC software, set the Rotation to
Reverse in the Forward and Reverse Application
Settings and parameterize the Speed.
If Forward is selected for
Enabled Direction, the
counterclockwise rotation of the
reverse switch has no function.
► Program the speed for counterclockwise rotation:
In the CellClutch PC software, set the Speed
and Rotation in the Forward and Reverse Appli-
cation Settings.
B C Output
mm mm
(in) (in)
209.0 28.5
1/4"
(8.23) (1.12)
209.0 28.5
1/4"
(8.23) (1.12)
209.0 28.5
1/4"
(8.23) (1.12)
17
1
1
EN
EN