Underfloor Weighing - KERN PCB 40-3 Manual De Instrucciones

6.9

Underfloor weighing

Objects unsuitable for placing on the weighing scale due to size or shape may be
weighed with the help of the flush-mounted platform.
Proceed as follows:
•
Turn off balance.
•
Open the closing lid at the bottom of the balance.
•
Carefully and completely hook in the hook for under floor weighing.
•
Place balance over an opening.
•
Suspend the item to be weighed from the hook and carry out weighing.
Fig. 1: Setup of balance for underfloor weighing
• Always ensure that all suspended objects are stable enough to hold the desired
goods to be weighed safely (danger of breaking).
• Never suspend loads that exceed the stated maximum load (max) (danger of
breaking)
Always ensure that there are no persons, animals or objects that might be damaged
underneath the load.
After completing the underfloor weighing the opening on the bottom of the balance
must always be closed (dust protection).
14
CAUTION
!
NOTICE
!
PCB-BA-e-0712