Reset To Factory Setting - KERN PCB 40-3 Manual De Instrucciones

8.7 Reset to factory setting

With this function the manual changes of the menu settings are reset to factory
setting.
For this switch on the balance using the
Press the key and keep it pressed until „UNIT" appears on the display.
Press the key nine times, in the display appears „rst".
Acknowledge selection with
Use the key to set the status to „YES".
When pressing the
time the status is reset to „no".
After that return to the weighing mode.
28
key and wait for the „0" display.
key. The current status „no" is displayed.
key, a reset to factory setting is carried out, and at the same
PCB-BA-e-0712