Maintenance And Cleaning; Disposal - Parkside PWS 125 F6 Traducción Del Manual De Instrucciones Original

Maintenance and cleaning

WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work on the appliance.
■ Do not use any sharp objects to clean the
appliance. Do not allow any liquids to get
into the appliance. The appliance could be
damaged.
■ The spare carbon brushes 4 should be ex-
changed via the carbon brush covers 5 ex-
clusively by the service centre or a recognised
specialist workshop.
■ Clean the appliance regularly, preferably imme-
diately after completion of the work.
■ Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners which can attack the
plastic.
■ A vacuum cleaner is required for thorough
cleaning of the appliance.
■ Ventilation openings must never be obstructed.
■ Remove any adhering swarf with a brush.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
PWS 125 F6

Disposal

The packaging consists of environmen-
tally friendly material. It can be dis-
posed of in local recycling containers.
Do not dispose of power tools
in the normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools are
collected separately and recycled in an environ-
mentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Dispose of the packaging in an envi-
ronmentally friendly manner. Note
the labelling on the packaging and
separate the packaging material com-
ponents for disposal if necessary. The packaging
material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
GB │ IE │ 13 ■