Engine Maintenance; Checking The Engine Oil Level; Draining The Gear Box Oil - SHERCO 250-300 SE/R 2013 Manual Del Propietário

250-300 SE/R

engine maintenance

CHeCKing THe engine Oil level

2

draining THe gear BOx Oil

1
2
92
All manuals and user guides at all-guides.com
- Make sure that the bike is on its two wheels ,
vertical and on a horizontal surface.
- Check the gear oil level , the oil should flow out
1
of the screw opening
If necessary add oil to achieve the correct oil
level.
- unscrew the engine oil filer cap 2 located on
the clutch housing
Topping up the engine oil
Engine oil
- Improved oil level can damage your engine .
- Do not use bike if the level is below the minimum .
- Remove the engine guard (
- When draining the oil the engine should be
warm.
h
Use protective gloves.
- Position the motorcycle upright on a level sur-
face.
- Place a container under the bike to catch the
old oil.
- Remove the drain plug
- Remove the drain plug
- Allow the oil to drain
- Clean the drain plugs
ser.
1
.
2
aTTenTiOn
aTTenTiOn
1
2
and
1
SAE 10W40
p.107)
☛
with a degrea-
2