125 SE/R
Engine maintenance
DRAINING THE GEAR BOX OIL
1
2
REFILLING THE GEAR BOX WITH OIL
2
1
98
- Remove the engine guard (
- When draining the oil the engine should
be warm.
h
ATTENTION
Use protective gloves.
- Position the motorcycle upright on a level
surface.
- Place a container under the bike to catch
the old oil.
- Remove the drain plug
- Remove the drain plug
- Allow the oil to drain
- Clean the drain plugs
with a degreaser.
- Install the drain plug
gasket.
Drain plug
12
- Remove the engine oil filler cap
- Fill the engine with oil
Motor oil
- Install the engine guard.
ATTENTION
To protect the environment, oil, oil filters and used
material must be deposited in a collection center
and not down drain or in the wild.
p.113)
☛
1
2
and
1
2
and
with a new
1
2
M16
15Nm
.
2
0,5l
SAE 10W40