Stihl MS 201 T Manual De Instrucciones página 31

2
3
H
L
Push the hand guard (1) forwards –
N
the chain is blocked
Simultaneously press the throttle
N
trigger lockout (2) and throttle
trigger (3) – set master control
lever (4)
Position cold start l
– If engine is cold (even if the engine
has stalled during opening of
throttle after starting)
Position warm start n
– If engine is warm (once the engine
has been running for approx. one
minute)
Hold and start the chain saw
N
MS 201 T
When the engine has turned over for
the first time
1
4
H
Move the Master Control lever (1) to
N
the position warm start n
Hold and start the chain saw
N
1
L
Once the engine is running
2
H
L
Press the throttle trigger lockout and
N
blip the throttle trigger (2); the
master control lever (1) jumps to
run F and the engine begins to idle
H
L
Pull the hand guard toward the
N
handlebar
The chain brake is released – the chain
saw is ready for use.
English
1
29