Troubleshooting - Schumacher SC1319 Manual Del Usuario

14. TROUBLESHOOTING

PROBLEM
Battery clamps do not
spark when touched
together.
All three LEDs come on for
2 seconds, then turn off.
The charger will not turn on
when properly connected.
I cannot select a 6V or 12V
setting.
POSSIBLE CAUSE
The charger is equipped
with an auto-start feature. It
will not supply current to the
battery clamps until a battery
is properly connected. The
clamps will not spark if
touched together.
The charger is plugged into
an AC outlet.
AC outlet is dead.
Poor electrical connection.
Battery is defective.
The charger is equipped
with Auto Voltage Detection,
which automatically detects
the voltage and charges the
battery.
• 10 •
SOLUTION
No problem; this is a
normal condition.
No problem; this is normal.
Check for open fuse or
circuit breaker supplying AC
outlet.
Check power cord and
extension cord for loose
fitting plug.
Have battery checked.
No problem; this is normal.