Testing The Fuse; Detailed Specifications; General Specifications - Beha-Amprobe Telaris ProInstall-100-EUR Manual Del Usuario

Testing the Fuse

1. Turn the rotary switch to
2. Short the leads and press and hold
3. If the fuse is bad, FUSE or Err1 will appear on the display to indicate the tester is
damaged and needs repair. Contact Amprobe Service for repair (see Contacting
Amprobe).

DETAILED SPECIFICATIONS

Features
Measurement Function
Voltage & Frequency
Wiring polarity checker
Insulation Resistance
Loop & Line Resistance
Prospective Short-Circuit current
(PSC/IK)
RCD switching time
RCD tripping level
Automatic RCD test sequence
Test pulse current sensitive RCDs
(Type A)
Test smooth dc sensitive RCDs
(Type B)
Earth Resistance
Phase Sequence Indicator
Other Features
Illuminated Display
Memory
Memory, Interface
Computer Interface
Software
Included Accessories
Soft case
Remote control probe

General Specifications

Specification
Size
Weight (with batteries)
Battery size, quantity
Battery type
switch setting.
Telaris ProInstall-100
√
√
√
√
√
√
√
√
√
None
None
√
√
√
√
√
√
√
Characteristic
11 cm (L) x 26 cm (W) x 13 cm (H)
1.5 kg
Type AA, 6 ea.
Alkaline supplied.
Usable with 1.2 V NiCd or NiMH batteries (not supplied)
24
Telaris ProInstall-200
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√