Klarstein 10032914 Manual De Uso página 38

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Fill the Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can
leave spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dis-
penser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns
completely black. The volume of the rinse aid container is about 110ml. Rinse aid is automatically added dur-
ing the last rinse, ensuring thorough rinsing, and spot and streak free drying. Rinse aid is automatically added
during the last rinse, ensuring thorough rinsing, and spot and streak free drying. Only use branded rinse aid for
dishwasher. Never fill the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid
detergent). This would damage the appliance.
Refill Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can judge
amount of rinse-aid by the color of the optical level indicator located next to
cap. When the rinse-aid container is full, the whole indicator will be dark .As
rinse-aid diminishes, the size of the dark dot decreases. You should never let
rinse aid get below 1/4 full.
1
1. To open the dispenser, turn the cap to the „open" (left) arrow and lift it out.
2. Pour the rinse aid into the dispenser, being careful not to overfill.
3. Replace the cap by inserting it aligned with „open" arrow and turning it to the closed (right) arrow.
Clean up any rinse aid split during filling with an absorbent cloth to avoid excessive foaming during the next
wash. Don't forget to replace the cap before you close dishwasher door.
38
2
C
3
t h e
t h e
t h e
t h e

Publicidad

Tabla de contenido
loading

Tabla de contenido