Delta 36-6023 Manual De Instrucciones página 39

Blue Tab
The blue scale corresponds with the blue tabs.
• The blue tab on the left of the rail can be used for right rip cut 0 inches to 22 inches.
• To use the blue scale insert the fence notches into the blue tabs on the rail.
• When the fence is inserted into the blue tabs, read the blue scale.
See Figure 50.
Blue Tab Extension
• The blue tab on the left of the rail can be used for right rip cut 0 inches to 22 inches.
• To use the blue scale insert the fence notches into the blue tabs on the rail.
• When the fence is inserted into the blue tabs, read the blue scale.
• Extend the extension wing to the right (Maximum 22 inches).
See Figure 51A.
For thin materials use the fence on the left of the blade. Fold down the thin fence to allow use of the blade guard. Subtract 2 inches
(50.8 mm) from the scale for accurate measurements.
See Figure 51B.
MAKING ADJUSTMENTS
FIGURE 50
FIGURE 51A
39
FIGURE 51B