Blending Tips - Oster BRLY07-Z00 Manual De Instrucciones

Ocultar thumbs Ver también para BRLY07-Z00:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STORING
Reassemble the blender for storage. Leave the lid open a gap so no
odors are retained.
WARNING: Never put the jar, or any other parts, in a
microwave oven. Never store foods or drinks in the jar.

BLENDING TIPS

Liquids
Put liquids into the jar first, unless the recipe says otherwise.
Using the jar lid food chute
Do not remove the lid while in use. Food may splatter if you do.
Instead, open the jar lid food chute to add smaller ingredients.
Working with Hot Foods or Liquids
WARNING: When you work with HOT FOODS, remove
the jar lid food chute to vent steam. Tilt the lid away
from you partially covering the opening. Keep hands
and other exposed skin away from the lid opening to prevent
possible burns.
When you work with HOT LIQUIDS, remove the jar lid food
chute and start at a low speed, and then gradually increase to a
faster speed. Do not add liquid over the cup (1L) level. Always
keep hands away from steam.
Be careful if hot liquid is poured into the food processor or blender,
as this can be ejected out of the apparatus due to sudden steam.
Ingredients Quantities
Use only the amount of food suggested in the recipes. If you want greater amounts, prepare in batches.
Using larger amounts may overload and strain the motor. You might also get different results from those
described.
Frequently Asked Questions
Why doesn't the blender/food processor turn on?
• Make sure the base is plugged in an active power receptacle.
• Verify blinking red light is active after pushing on/off button.
How can I prevent liquids from leaking out?
Check to see that the sealing ring is correctly assembled in between the multi-functional blade and the jar.
E n g li s h - 8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Brly07-s00Brly07-r00Brly07-v00Brly07-g00

Tabla de contenido