Measuring Continuity; Measuring Resistance - Ideal 61-327 Manual De Operación Y Seguridad

Verifying Continuity (
• Verify the circuit is de-energized.
• The meter will sense the level of resistance and beep if the resistance is less
than 10 Ω's to confirm that continuity is present.
• The red LED will illuminate and the resistance value will be displayed.
Measuring Resistance (Ohms / Ω) Manually Select Range
From 00.0 to 400-4MEG Ohms
Verify the circuit is de-energized to obtain accurate measurements.
)
15