Publicidad
Idiomas disponibles
Idiomas disponibles
en
16
Mounting application tools (figure 6).
Release the clamping lever and tilt it to the
stop.
Pull out the fastening element.
Clean the tool holder, the application tool and
the fastening element.
Insert the application tool accurately into the
star-shaped tool holder. Pay attention that the
application tool is mounted flush.
Fig. 6
Fastening element
2.
Clamping lever
1.
1.
180°
3.
4.
180°
Cover
2.
When changing application
CAUTION
tools with sharp cutting
edges, use cover 3 21 74 011 00 0 to protect
yourself against hand injuries.
Firmly press in the fastening element to
the stop. Then lock the clamping lever.
4.
3.
180°
5.
6.
5.
8.
180°
Fastening element
Application tool
Fastening element
Application tool
Cover
7.
Publicidad
