Introduction; Functions And Use Of The Use And Maintenance Manual; Symbolism And Qualification Of Operators; Compliance Certificate - CAMPAGNOLA EASY 80 Manual De Uso

1 INTRODUCTION

1.1

Functions and use of the use and maintenance manual

Before working on the equipment, carefully read and understand this Use and Maintenance Manual in order to safeguard
the operator and to avoid damaging the machine. These instructions describe how to operate the equipment safely,
economically and in compliance with the current safety regulations. Following these instructions helps avoid dangerous
situations, reduces repair costs and down-time and extends the life-span of the machine. This manual is to be kept legible
and in good condition. The operating and maintenance staff must have it at hand, so that it can be read whenever needed.
1.2

Symbolism and qualification of operators

All operations herein described must be performed by qualified personnel and in compliance with the Manufacturer's
manual. Each procedure is accompanied by an icon which indicates the necessary operator's qualification. The
indication to identify the personnel qualifications are given below.
Operators
Personnel who can install, operate, adjust, clean, repair, transport the equipment and carry out its routine maintenance.
Qualified mechanics
Personnel with mechanic competences, capable of installing, servicing and/or repairing the product and of operating it
even when all its safety devices are partially or totally off. He cannot carry out interventions on the electric/electronic
system.
Electric/electronic maintenance technicians
Personnel with specific electric/electronic skills capable of performing installation, extraordinary maintenance and/or
repairs and of operating the product even when the safety and protective systems are partially or fully disabled. This
person is not qualified to perform mechanical interventions.
AUTHORIZED WORKSHOP
These are the centres authorised by the Manufacturer to repair the
WARNING!
Precautions to be taken in order to safeguard the operators and bystanders in the work area .
IMPORTANT!
Precautions to be taken in order to avoid problems with the equipment and to operate it in compliance with the
current safety regulations.
1.3

Compliance certificate

All the products marketed in the European Union (EU) must fully comply with the European Council Directive
2006/42/EC. The compliance certificate is supplied by the Manufacturer with the Use and Maintenance Manual.
1.4

Receiving the product

When receiving the product, make sure:
•
the product has not been damaged during transport;
• the product supplied matches with the order. Check that all parts have been delivered (refer to "Product Description",
in "Specifications" chapter).
If problems arise, please contact the Manufacturer's Service Department quoting all details indicated on the nameplate
("refer to "Product Identification", in "Specifications" chapter).
1.5

Warranty

For the general warranty
http://www.campagnola.it/downloads, or send a written request to the fax number +39 051752551, or send an e-mail to:
star@campagnola.it
WARNING!
For warranty claims, according to the above-mentioned points, it is necessary to enclose the properly filled-in warranty
card and the corresponding purchase proof with date of purchase (invoice or any other document with legal value).
Use and Maintenance Manual – Original
Instructions Rev.: 02, Date 22/07/2019
conditions check the
products.
dedicated area in the Campagnola website at:
Page 23