Technical Details; Installation, Pre-Use Controls, Delivery And Handling; Charging The Battery - CAMPAGNOLA EASY 80 Manual De Uso

3.6

Technical details

Electric pruning shear
1 Max cutting
2 Rated voltage
3 Rated power
4 Rated current
5 Current protection
6 Class
7 Weight
Lithium ions battery
1 Capacity
2 Voltage
3 Autonomy
4 Weight
Battery charger
1 Input voltage
2 Output voltage
3 Charging current
4 Class
5 Charging time
4 INSTALLATION, PRE-USE CONTROLS, DELIVERY AND
HANDLING
4.1

Charging the battery

Warning!
Never expose the battery to extreme conditions such as too high temperatures or shocks. Operator's injuries
can be caused by leakage of battery electrolytic solution.
Warning!
Disconnect the battery from the tool before charging.
•
Always make sure the battery is dry and clean before charging.
•
Make sure the battery is fully charged before using it for the first time.
•
The battery is not fully charged when you buy it. It must be recharged for 4-5 hours before first using it.
•
Recharge the battery when the indicator shows just one led light.
•
Do not leave the battery in charge for more than 5 hours. Do not make it become completely flat, otherwise its life
span will be reduced.
•
The battery must be replaced when its autonomy becomes too short. Just use the original batteries supplied by
the Manufacturer.
•
Always comply with the safety instructions and the environment protection guidelines.
Page 30
EASY 80
36 mm in case of green
branches
DC 44 V
300 W
10 A
≥35 A
III
1.3 kg
4.4 Ah
43.2 V
8-10 h
1.5 kg
100-240 V AC, 50-60 Hz
DC 50.4 V
1.0 A
II
4-5 h
EASY 150
36 mm in case of green
branches
DC 44V
300 W
10,0 A
≥3 5A
III
1,6 kg
4,4 Ah
43,2 V
8-10 h
1,5 kg
100-240 V AC, 50-60 Hz
DC 50,4 V
1,0 A
II
4-5 h
Use and Maintenance Manual – Original
Instructions Rev.: 02, Date 22/07/2019
EASY 200
36 mm in case of green
branches
DC 44V
300 W
10,0 A
≥3 5A
III
1,8 kg
4,4 Ah
43,2 V
8-10 h
1,5 kg
100-240 V AC, 50-60 Hz
DC 50,4 V
1,0 A
II
4-5 h