stayer LOM130 3P Manual De Instrucciones página 13

The values given are valid for nominal voltages [U]
230/240 V - 110/120 V. For lower voltage and
models for specific countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual machi-
nes may vary.
The typical level of sound pressure apparatus , determined
with a filter A, amounts to: Sound pressure level 90 dB (A);
sound power level 91 dB (A). Tolerance K = 3 dB.
Wear hearing protection !
Total vibration values ( vector sum ) determined according
to EN 62841: Sanding drywall ah = 4 m/s2 , K = 1.5 m/s2.
The vibration emission level given in this information
sheet has been determined by the measurement
procedure specified in EN 62841 and may serve as a
basis for comparison with other power tools. It is also
suitable for provisionally assess the stress experienced
by the vibrations. The vibration emission level has been
determined for the main applications of the tool .
Therefore, the vibration level may be different if the tool
is used for different applications, with different votes , or if
the maintenance of it was lacking. This may significantly
increase the exposure level over the total working period .
To accurately determine the stress experienced by the
vibration should also consider those times when the tool
is switched off or when it is running but not actually doing.
This may significantly decrease the exposure level over the
total working period. Attach additional security measures
to protect the wearer from the effects of vibration such
as: maintenance of power tools and accessories, keep the
hands warm, organization of work patterns.
ENGLISH
13
5.2 Declaración de Conformidad CE
The undersigned: STAYER IBERICA, S.A.
Internet address:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: 902 91 86 81
CERTIFIED
The machine:
Type: ORBITAL SANDER
Model: LOM 130 3P
Declare under our responsibility that the product described
under "Technical Data" is in accordance with the following
standards or standardization documents: EN 50581, EN
61000-3-3, EN 61000-3-2, EN 55014-2, EN 55014-1,
EN 62841-2-4, EN 62841-1. according to 2006/95/CE,
2004/108/CE y 2006/42/CE.
Ramiro de la fuente
Director Manager
13
June 2020