Baby auto JAN FIX 23 Manual De Uso página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT
Please read carefully BEFORE
installing the child seat in the vehicle.
NOTIFICATION
1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to
Regulation No. 44,04 series of amendments for general use in
vehicles fitted with ISOFIX and 3 point seat belts approve acc to
R-16 ECE.
2. The product must only be used on a forward facing seat that
is fitted with the ISOFIX and 3-point belt which is approved
according to ECE R16 or an equivalent standard. The product
may be used on either the front or the back seat. However, we
recommend that it is fitted on the back seat.
3. The product has been approved according to the strictest
European safety standards (ECE R44/04) and is suitable for
Group II (15-25kg) and Group III (22-36kg) with 3-point belt and
the ISOFIT system.
4. After an accident the seat may become unsafe due to damage
that is not be noticeable immediately. It should therefore be
replaced.
5. The safety of the seat can only be guaranteed by the
manufacturer if it issued by the original owner.
6. Ensure that all luggage and objects likely to cause injury in the
event of an accident are properly secured.
7. The moving parts of the car seat should not be lubricated in any
way.
8. The baby car seat must not be used without the cover. Please use
an original cover, as the cover contributes to the safety of the seat.
9. The seat must be secured with a seat belt or ISOFIT, even when
it not on use. An unsecured seat may injure other passengers in
the car in an urgent stop.
10. The rigid items and plastic parts of a child restraint must be so
located and installed that they are not liable, during everyday
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hb-27

Tabla de contenido