Cleaning And Maintenance - Baby auto JAN FIX 23 Manual De Uso

4. GROUP 2 AND 3. INSTALATION FOR CAR BELT (3 POINTS) AND
ISOFIT SYSTEM
1. Place the child seat on the seat of the vehicle.
2. Follow the steps described in section 3.
3. Place the child safety seat in the back seat of the vehicle facing
in the direction of travel.
4. Sit the child on the seat and then fasten the car seatbelt,
inserting it into the buckle until you hear a click. Ensure that the
abdominal strap goes underneath the armrests
5. Thread the diagonal part of the belt through the headrest until
it is securely in place
twisted.
6. Depending on the child's growth, the headrest
adjusted in height.
7. Make sure the vehicle's safety belt is not twisted, also check that
the seat cover does not impede the movement of the vehicle
seat belt or prevent the installation of the seat in any way. Ensure
that the belt has no slack. To release your child unbuckle the
vehicle safety belt as described in the instructions.

5. CLEANING AND MAINTENANCE

1. To wash belts and plastic parts, use neutral detergent and
warm water.
2. Ensure that soap does not enter inside the buckle or metal pieces.
3. Do not use chemical products or bleach on any part
of the child seat.
14
(B) (fig. 4.1/A). Make sure that it is not
(C)
(fig.4.1/B).
(A) can be