Water Package; Mist Cooler System - Husqvarna HTC T6 Manual De Usuario

HTC DURATIQ
Test that the pairing succeeded by pressing any button on the remote control, a green LED
adjoining the text
remote control is pressed.
Teaching More than One Remote Control
While the RF LED is lit according to step 3 above, press any button on all remote controls
that are to be paired with the GPS tracker. Check that the RF LED goes out and lights up to
confirm the pairing when the button on the remote control is pressed in.

7.4 Water package

7.4.1 Mist Cooler System

Machines from HTC can be equipped with a Mist Cooler system for effective cooling of the
grinding tools. The Mist Cooler System can be offered as a retrofit.
The Mist Cooler System creates a very finely divided water mist that is distributed on the floor
surface through a nozzle. The system is used to obtain a better performance during grinding,
while it is possible to grind dry and use a standard dust extractor for the dust. This cools the
tools and makes grinding more effective. The Mist Cooler System reduces the risk of the
diamond tools "glazing over".
The system uses the water in the tank. When the water level is low, the mist symbol changes
colour to yellow.
D002998, 02.00
RF on the GPS tracker should light up and go out when any button on the
Accessories
51