Wet Grinding - Husqvarna HTC T6 Manual De Usuario

HTC DURATIQ
Grinding
Attach the appropriate tool to the machine.
Set the handle to the working position.
Fill the tank with cold water.
Start the Mist Cooler System by pressing the
button on the control panel. When the
system is active, the symbol on the display
for the Mist Cooler System is lit.
When grinding is finished, the Mist Cooler
System also switches off. If the Mist Cooler
System is still active, this is indicated by a
flashing symbol. Press again to activate.
Switch off the Mist Cooler System by
pressing the same button once grinding is
finished.

7.4.2 Wet grinding

52
NOTE
Make sure the water supply is only on during grinding. Always
use liquid suction when wet grinding.
Accessories
D002998, 02.00