Harness Buckle - Britax ADVOCATE Guia Del Usuario

Britax Child Safety, Inc.
f. Reattach the two
elastic loops at the
front of the lower shell.
3. Replace the belly pad and
buckle:
a. Turn the buckle
retainer sideways and
route it through the
belly pad.
b. Route the belly pad
and buckle retainer
through the buckle slot
in the cover.
– Ensure that the
buckle is through the
correct cover slot for
the buckle position.
c. Turn the buckle
retainer sideways,
route it through the
front buckle slot and
into the desired buckle
position in the child
seat.
4. Pull the seat cover around
the CLICKTIGHT bezel
and over the front of the
seat.
5. Ensure the seat cover
is tucked behind the
CLICKTIGHT bar.
6. Reattach the two elastic
loops on the underside of
the seat cover.
38
All manuals and user guides at all-guides.com
2f
3a
3b
3c
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
7. Replace the head
restraint.
a. Raise the harness to
the highest position.
b. Reattach the elastic
straps to the rear of
the head restraint.
c. Reattach the hook and
loop fasteners on the
head restraint around
the harness.
8. Replace the comfort
pads.

Harness Buckle

IMPORTANT: If your child eats and drinks while in the
child seat, you will need to check the buckle periodically
and rinse out any accumulated debris (see page 44).
Removing the Harness Buckle
1. Unbuckle the harness and
open the CLICKTIGHT.
2. Lift the front of the seat
cover and pull over the
CLICKTIGHT bezel to
access the buckle strap
connection.
3. Remove the
harness buckle by
turning the buckle
strap sideways and
routing the retainer
out of the front
buckle slot in the
child seat.
6b
6c
39