Sony NEX-VG900 Guía De Operaciónes página 34

image stabilizing feature, SteadyShot will not be usable.
You can capture photos from recorded movies (NEX-VG900).

You can check the recordable time, estimated remaining capacity, etc., by touching

[Setup]  [
The LCD screen of your camcorder can display recording images across the entire screen (full pixel

display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [Guide Frame] to
[On], and record images using the outer frame displayed on the screen as a guide.
Data code during recording
The recording date, time and condition are recorded automatically on the memory card. They
are not displayed during recording. However, you can check them as [Data Code] during
playback. To display them, touch
 [Data Code]  a desired setting 
Shooting photos
(Movie): When recording a movie
(Photo): When recording a photo
MODE button

Press MODE to turn on the
The LCD screen display switches for photo recording mode.

Press PHOTO lightly to adjust the focus, then press it fully.
US

Media Settings)]  [Media Info].
(
(MENU)  [Setup]  [
.
PHOTO
button
When
(Photo) lamp.
(MENU) 
( Playback Settings)]
Flashes  Lights up
disappears, the photo is recorded.