Step 3: Charging The Battery Pack - Sony NEX-VG900 Guía De Operaciónes

Step 3: Charging the battery pack

Battery pack
CHG (charge) lamp
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.

Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.

You cannot attach the "InfoLITHIUM" battery pack NP-FV30/FV50, even though they are V series.

1
Slide the POWER switch to OFF (the default setting).
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
Align the  mark on the DC plug
with that on the DC IN jack.
DC IN jack
AC Adaptor
(Mains lead)
To the wall outlet
DC plug
Power cord
(wall socket)
US
1