Rear-Facing Installation With; Vehicle Seat Belts - Graco CLASSIC RIDE 50 Manual De Instrucciones

REAR-FACING
WARNING
LATCH belt MUST be stored when
using vehicle seat belt to install
child restraint.
1
Store LATCH belt by attaching to connectors
through forward-facing openings
fig. k
side (fig. a).
LATCH
by pulling adjustment belt.
2
Adjust car seat to recline position
(see fig. b
Place rear-facing
3
4
18
INSTALLATION WITH
fig. g
(fig. c).

VEHICLE SEAT BELTS

5
belt MUST stay tight.
6
Vehicle must
Ball MUST be entirely in blue zone (fig.e). If
necessary, place rolled towels under child
DO NOT use tether
child.
(fig. d)
and child in
fig. c
rear-facing must