Battery Replacement; Troubleshooting - TFA MODUS PLUS 35.1122 Instrucciones De Uso

TFA_No. 35.1122_Anl. 07.09.2012
MODUS PLUS – Wireless weather station
7.13 Positioning and fixing of basic unit and outdoor transmitter
• With the foldable leg at the back of the unit, the basic station can be
placed onto any flat surface or wall mounted at the respective location by
the hanging hole at the back of the unit. Avoid the vicinity of any interfer-
ing field like computer monitors or TV sets and solid metal objects.
• Choose a shady and dry position for the transmitter. (Direct sunshine fal-
sifies the measurement and continuous humidity strains the electronic
components needlessly).
• Check the transmission of the signal from the outdoor transmitter to the
basic unit (transmission range 75 m free field). Within ferro-concrete rooms
(basements, superstructures), the received signal is naturally weakened.
• If necessary choose another position for the outdoor transmitter and/or
basic unit.
• If the transmission is successfully, fix the outdoor transmitter by using a
nail (not included) on the wall or place it onto a flat surface.
8. Care and maintenance
• Clean the instruments with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if you do not use the products for a lengthy period.
• Keep the instruments in a dry place.

8.1 Battery replacement

• Replace the batteries when the battery symbol of the basic station
appears next to the time display.
• When the batteries of the transmitter are used up, the low battery icon
appears next to the outdoor temperature display.
• Make sure the polarities are correct. Close the covers again.
• Please note: When the batteries are changed, the contact between trans-
mitter and receiver must be restored – so always insert new batteries into
both units or start a manual transmitter search.

9. Troubleshooting

Problems Solution
➜ Ensure batteries polarity are correct
No display
➜ Change batteries
on the weather station
➜ No transmitter installed
No transmitter reception
➜ Check batteries of external transmitter
Display "---"
for channel 1/2/3
➜ Restart the transmitter and
➜ Start manual search for the transmitter
➜ Choose another place for the transmitter
22
14:18 Uhr Seite 12
(do not use rechargeable batteries!)
weather station as per the manual
and/or the weather station
MODUS PLUS – Wireless weather station
➜ Reduce the distance between the
transmitter and the weather station
➜ Check if there is any source of interference
➜ See: "No reception of the transmitter"
No DCF reception
➜ Manual clock setting
➜ Wait for attempted reception during the night
➜ Change batteries
Incorrect display
10. Waste disposal
This product has been manufactured using high-grade materials and com-
ponents which can be recycled and reused.
Never dispose empty batteries and rechargeable batteries in
household waste.
As a consumer, you are legally required to take them to your
retail store or to appropriate collection sites depending to
national or local regulations in order to protect the environ-
ment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste
Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste.
The user is obligated to take end-of-life devices to a designated
collection point for the disposal of electrical and electronic
equipment, in order to ensure environmentally-compatible dis-
posal.
11. Specifications
Basic unit:
Measuring range indoor
Temperature: -10 °C... +60 °C (+14°...+140 °F)
Resolution: 0.1 °C (0.2 °F)
Humidity: 20 %rH ... 99 %rH
Operating environment: 0 °C...+50 °C (+32 °F...+122 °F)
Power consumption: 3 x 1.5 V AA (Batteries not included)
Dimensions: 100 x 34 (84) x 168 mm
Weight: 237 g (only instrument)
23