ENGLISH
Advanced Recording
EASY Mode (for Beginners)
✤ The EASY mode allows a beginner to easily make good quality
video recordings.
I
The EASY mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode.
2. By pressing the EASY Q button, all functions on the
camera will be set to off and the recording settings
will be set to the following basic modes:
I
Battery level, recording mode, counter,
DATE/TIME, and EIS (
I
The word "EASY.Q" will appear on the LCD at
the same time.
However, the DATE/TIME will only be seen if it
has been previously set. (see page 57)
3. Press START/STOP to start recording.
I
Recording will begin using the basic automatic
settings.
I
The camera will return to the settings that were
set prior to activating EASY Q mode.
4. Pressing the EASY Q button again turns the EASY mode off.
I
The camera will return to the settings that were set prior to
activating EASY mode.
Notes
I
In EASY mode, certain functions are not available, such as MENU,
BLC, AF/MF.
-
If you want to use these functions, you must first switch the
EASY mode off.
I
The EASY mode settings are deleted when the battery pack is
removed from the camcorder and therefore must be reset when a
battery pack has been replaced.
) will be displayed.
EASY
Grabación avanzada
Modalidad SENCILLA (para principiantes)
✤ La modalidad sencilla (EASY) permite a los principiantes obtener
buenas grabaciones con facilidad.
I
La función EASY sólo opera en las modalidades CAMERA.
1. Ajuste el interruptor en la modalidad CAMERA.
2. Pulse el botón EASY Q para que se desactiven
todas las funciones de la videocámara. Los ajustes
de grabación se acomodarán a las siguientes
modalidades básicas:
EASY
I
Aparecerán en la pantalla las funciones nivel de
la batería, modalidad de grabación, contador,
FECHA/HORA y EIS (
STBY
I
Al mismo tiempo, aparecerá en la pantalla LCD
0 : 0 0 : 0 0
la palabra "EASY.Q". No obstante, la función
5 5 min
FECHA/HORA sólo se verá si se ha ajustado
previamente (ver página 57).
3. Pulse START/STOP para comenzar la grabación.
I
La grabación empieza con los ajustes
1 0 : 0 0 A M
automáticos básicos.
J A N . 1 0 , 2 0 0 4
I
La videocámara volverá a los ajustes hechos
antes de activar la modalidad EASY.
4. Si vuelve a pulsar el botón EASY Q en la modalidad STBY, se
desactivará la modalidad EASY.
I
La función EASY no se desactivará cuando haya grabado.
I
La videocámara volverá a los ajustes hechos antes de activar
la modalidad EASY.
Notas
I
En la modalidad EASY, no se puede acceder a algunas funciones
como MENU, BLC y AF/MF.
-
Si desea usar estas funciones, primero deberá desactivar la
modalidad EASY.
I
Los ajustes de la modalidad EASY se borran cuando se quita la
batería de la videocámara y, por lo tanto, deberán ajustarse de
nuevo al reemplazarla.
ESPAÑOL
).
63
63