Weber SUMMIT S-660 Guia Del Propietario página 105

POSITIONING YOUR GRILL
When determining a suitable location for your Summit
thought to concerns such as exposure to wind, proximity to traffic paths, and keeping
any gas supply lines as short as possible. Never locate the Summit
garage, breezeway, or shed, under an unprotected overhang, or in any other enclosed
area. Position the grill and structure so there is enough room to safely evacuate the area
in case of a fire.
CLEARANCE FROM SURFACES OR STRUCTURES
m WARNING: The structure, "island," countertops, and adjacent
work areas for the Built-In Grill installation must be built from
noncombustible materials only.
NOTE: If you have questions on which materials are considered noncombustible, contact your
local building materials supplier or fire department.
BUILT-IN CUTOUT DIMENSIONS
Gas Grill installation, give
®
Gas Grill in a
®
◆
CLEARANCES - INSTALLATION ADJACENT TO A STRUCTURE
1
2
1
24" (610 mm) any surface
2
27" (686 mm) minimum for lid clearance
CLEARANCES - "ISLAND" INSTALLATION
1
2
1
24" (610 mm) any surface
2 27" (686 mm) minimum for lid clearance
3 10 ⁄
1
2
1
1
3
1
" (267 mm) minimum
WWW.WEBER.COM
5