SEVERIN KS 9770 Instrucciones De Uso página 19

The heated air around the rear of the unit must be able to circulate freely. Therefore, ensure that the
air circulation behind the unit is not obstructed.
Caution: Ensure at all times that the rear ventilation openings around the top cover are not
obstructed.
Reversible door
If required, the door may be reversed, i.e. from right-hinged (default installation) to left-hinged.
Warning: Always disconnect the unit from the mains before any maintenance or repair work is
carried out.
Before you get started, please note the following:
– Always ensure that the correct number of washers is used on the hinge bolts.
– So that the doors can close tightly against the frame, take the utmost care that they are properly
aligned during re-assembly.
1. Remove the four covers c from the housing and inside of the door.
2. Unscrew the hinge bolt on the inside of the door in the area c/6.
Caution: Support the door.
3. Take off the refrigerator door.
4. Take out the fixing screws and remove the upper bracket 6. Note the small plastic plate
underneath the bracket.
5. Turn the bracket 6 including the small plastic plate through 180° and replace it on the other side
of the refrigerator, using the two screw holes adjacent to each other.
6. Remove the hinge support 5 from the underside of the door and fit the hinge support provided
on the opposite side.
19