Package Contents - Boston Scientific Clik X MRI Anchor Instrucciones De Uso

ENGLISH
Clik™ X MRI Anchor
Model SC-4319
The Clik X MRI anchor has been sterilized with ethylene oxide prior to shipment.
Inspect the condition of the sterile package before opening the package and using the contents. Do not
use the contents if the package is broken or torn, or if contamination is suspected because of a defective
sterile package seal.
• Do not use any component that shows sign of damage.
• Do not resterilize the package or the contents. Obtain a sterile package from Boston Scientific
Neuromodulation.
• Do not use if "Use By" date has expired.
CAUTION: Ensure Clik X MRI anchor is only used with Avista™ MRI Leads.
Note: The anchors are intended for single use only.
A Boston Scientific Neuromodulation (BSN) hex wrench is required to engage the locking mechanism.
The hex wrench is packaged separately from the Clik X MRI anchor, and is available in the IPG Kit, Lead
Extension Kit and as a spares kit.

Package contents

(2) Clik X MRI anchors
CAUTION: Do not modify or damage anchor.
Eyelets
Proximal
(Short) End
Package contents
Distal
(Long) End
Set Screw
Port
91030569-02 Rev B
Clik™ X MRI Anchor
1 of 80