Accessories; Environment - Festool LEX 2 185/7 Manual De Instrucciones

Lubrication
If the tool is not used for longer periods, e.g. for a
weekend, introduce 1 or 2 drops of lubricating oil
into the compressed-air supply [5-2] on the tool
prior to use.
Replacing the silencer
In order to maintain the power and performance of
the compressed air tool, replace the silencer on the
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
Do not dispose of the device together
with domestic waste! Dispose of ma-
chines, accessories and packaging at
IAS hose systems at regular intervals.
Cleaning the extraction channels
We recommend cleaning the extraction channels in
the machine [5-3] roughly once a week (particular-
ly if sanding synthetic resin, in the case of wet sand-
ing and if sanding plaster) using a small flat brush
or a cloth.

Accessories

Environment

an environmentally responsible recycling centre.
Observe the valid national regulations.
11