Service And Maintenance; Accessories; Environment; General Information - Festool ETS EC 150/3 EQ Manual De Instrucciones

English
9

Service and maintenance

WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the housing to be opened should al­
ways be carried out by an authorised serv­
ice workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festool.co.uk/service
5
3
2
1
– To ensure constant air circulation, always
keep the cooling air openings in the motor
housing clean and free of blockages.
– In the event of a slowdown in performance
or increased vibrations, blow and clean
cooling air openings.
9.1 Cleaning the extraction channels
We recommend cleaning the extraction chan­
nels in the machine [4-1] roughly once a week
(particularly if sanding synthetic resin, in the
case of wet sanding and if sanding plaster) us­
ing a small flat brush or a cloth.
9.2 Cleaning the inside of the power tool
Regularly clean the inside of the power tool at
the bottom of the fan, [4-3] otherwise the vibra­
tion values worsen as a result of the dust accu­
mulation.
9.3 Replace the sanding pad and sanding
pad brake
The rubber sleeve [4-2] brushes off the sanding
pad and prevents uncontrolled turning of the
sanding pad. The sanding pad brake is almost
wear-free thanks to the pins used.
In the case of a decreasing braking effect, first
check the sanding pad for wear and replace it if
necessary. Replace the damaged sanding pad
brake/rubber sleeve.

10 Accessories

Always use original Festool tools and accesso­
ries. Using low-quality tools or accessories
18
from other manufacturers may increase the
risk of injury and seriously unbalance the ma­
chine, decreasing the quality of the working re­
sults and accelerating power tool wear.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.

11 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information about collection points for correct
disposal is available at
cling .
Information on REACH:
reach

12 General information

12.1 Information on data privacy

The power tool contains a chip which automati­
cally stores machine and operating data. The
data saved cannot be traced back directly to an
individual.
The data can be read in a contactless manner
using special devices and shall only be used by
Festool for fault diagnosis, repair and warranty
processing and for quality improvement or en­
hancement of the power tool. The data shall not
be used in any other way without the express
consent of the customer.
Imported into the UK by
Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain
www.festool.co.uk/recy­
www.festool.co.uk/