Ikegami ISD-A20 Manual De Instrucciones página 10

(2)ID characters setting
Keep CAMERA ID highlighted and press
the E button. The screen at right shows up.
① ID
Press the E button on ID, and the
cursor appears. With the L or R
button, select a character. Press the
E button to save it, and the character
box advances to the next one. To
delete a character, press the E button to go through the code and place the cursor
in the character to delete. Press the L or R button to get the box blank.
② ID ALL CLEAR
Highlight this item and press the E button. The ID code is cleared.
③ ID POSITION
Highlight this item and press the L or R button. In this way, the ID code can be
positioned up or down.
④ RET
Press the E button to go back to the main menu screen.
5-4-2. LIGHT CONTROL
(1)Select LIGHT CONTROL on the main
menu screen. Press the E button, and
the screen at right shows up.
* The IRIS LEVEL item appears only
when the lens selector switch at the
camera's back is set at DC.
(2)BACKLIGHT CMP.
Highlight this item and the backlight
compensation modes can be selected
(ON, 1SPOT, 2SPOT and OFF).
① ON
Usual backlight compensation is made.
ＩＤ ＥＤＩＴ
→ＩＤ.....................
ＩＤ ＡＬＬ ＣＬＥＡＲ
ＩＤ ＰＯＳＩＴＩＯＮ ＵＰ
ＲＥＴ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
→ＢＡＣＫＬＩＧＨＴ ＣＭＰ． ＯＦＦ
Ｗ．ＤＹＮＡＭＩＣ
ＩＲＩＳ ＬＥＶＥＬ
ＬＥＮＳ ＩＲＩＳ
ＦＦＤ ＯＦＦ
ＲＥＴ
E-8