Setup Procedures - Ikegami ISD-A20 Manual De Instrucciones

5-3-2. SPECIAL MENU
ＳＰＥＣＩＡＬ ＭＥＮＵ Ｖ１．００
→ＰＡＧＥ １／２
ＣＨＲＯＭＡ
ＤＥＴＡＩＬ
ＳＥＴＵＰ ７．５ＩＲＥ
ＭＯＮＩＴＯＲ ＣＲＴ
ＤＮＲ ＯＦＦ
ＲＥＴ
(1) PAGE
(2) CHROMA
(3) DETAIL
(4) SETUP
(5) MONITOR
(6) DNR
(7) VIDEO STANDARD
(8) COLOR BAR
(9) RET

5-4. Setup procedures

5-4-1. CAMERA ID
(1)CAMERA ID ON/OFF setting
Highlight CAMERA ID. Using the E, L
or R button, access the ON/OFF
setting. Decide the ON or OFF setting
with the L or R button.
Selection of page 1/2 or 2/2.
Used to adjust the chroma level.
Used to adjust the details.
Used to select the setup levels (0 IRE and 7.5 IRE).
Selection of monitor CRT or LCD
Switching on and off of noise reduction.
Used to switch between the video signal systems (NTSC/PAL).
Used to turn on and off the color bars.
Used to go back to the main menu screen.
E-7
Highlight EXIT on the SETUP MENU
screen. Hold down the L and R buttons
together, and the screen at left appears
onscreen.
(Page 1/2 shown at left)
Ｓ Ｅ Ｔ Ｕ Ｐ Ｍ Ｅ Ｎ Ｕ
→ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
ＧＡＩＮ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＡＴＷ
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＳＥＴＵＰ ＥＸＩＴ