Sew The Sequence; Single Sequence Mode; Sewing Sequence From The Beginning - Singer C440 Manual De Instrucciones

To Recall Memorized Sequence
1. Press the Load button on the Sequence Screen.
2. The memories are indicated by numbers. Press the
desired sequence/memory.
3. When the selected file number is highlighted, press the " ✓ "
button.
4. Recalled sequence is shown on the left side of LCD.
You can now sew the recalled sequence.
NOTE: If another sequence has been created or loaded before
loading from memory, the loaded sequence will be added at
the cursor position.
Sew the Sequence
After selecting stitches for a sequence, the sequence will sew
repeatedly.
1. Attach the Satin Foot when sewing decorative & letter
stitches.
2. Lower the presser foot and start sewing. Machine will start
sewing from first entered pattern, and sew the sequence
repeatedly.
NOTE: By pressing the Thread Cutter button while sewing,
machine will stop at the end of sequence and cut threads.
Single Sequence Mode
By pressing the Single Sequence button, the icon will change
to a circle and activate the single sequence mode. This mode
has two functions.
1. Adjustments as one stitch pattern: The value of stitch
length and width are now common for all stitch patterns in
the sequence. You can change the length/width and mirror/
reverse of all stitches as one stitch pattern.
2. Sewing one single time: The stitch sequence will sew one
time and then stop at the end of the sequence.
NOTE: In this mode, the Delete button is not activated. Press
the Single Sequence button again to activate.
Sewing Sequence from the Beginning
Whenever pressing the Restart button, machine will start
sewing sequence from beginning.
Sequencing
42