Festo SBO Serie Instrucciones Para El Usuario página 24

4 Notes on commissioning and operation
Carry out commissioning with the CheckKon software
package (see also CheckKon Help).
4.1 Installing and starting CheckKon
Note
Administrator rights are required for installing the
CheckKon.
CheckKon is installed on your PC with an installation
program.
You can install CheckKon and the SBO−DeviceManager
from the CD ROM as follows:
1. Close all programs.
2. Place the Festo CheckKon CD in your CD ROM drive.
If Auto Run is activated on your system, installation will
start automatically and you can omit steps 3 and 4.
3. Select [Execute] in the start menu.
4. Enter D:\setup (if necessary, replace D by the letter of
your CD ROM drive).
The Setup program installs the CheckKon and the SBO−
DeviceManager applications:
5. Follow the instructions on the screen.
24 Festo P.BE−K−SBO−Q 0809b English